In this Test Tuesday we are testing casting epoxy. I am using EasyCast clear casting epoxy. This is a two-part, low odor product. I allowed the epoxy to cure for 72 hours.
All the samples tested well. The epoxy did not cause any damage to the foam. The area surrounding the epoxy pool on the standard Readi-Board, Adams Premium, and Readi-Grid samples had a slight halo effect where the paper absorbed some of the product.
After bending the Readi Water Resistant sample, I was able to (carefully) peel away the cured epoxy. I was unable to do this with the Readi-Erase sample.